Instrument Panel Cluster Trim Plate Replacement (Acadia)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Cluster Trim Plate (Acadia)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the drivers knee bolster. Refer to Driver Knee Bolster Replacement (Acadia) .
1	Instrument Panel Cluster Trim Plate Screw (Qty: 2) CAUTION: Refer to Fastener Caution .
2	Instrument Panel Cluster Trim Plate Assembly Procedures Disconnect the electrical connection. Transfer all necessary components.

Callout

Component Name

Preliminary Procedure
Remove the drivers knee bolster. Refer to Driver Knee Bolster Replacement (Acadia) .

Instrument Panel Cluster Trim Plate Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Instrument Panel Cluster Trim Plate Assembly

Procedures

Disconnect the electrical connection.
Transfer all necessary components.