Removal Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fuel Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS COMPANY

Remove the fuel tank module. Refer to Fuel Tank Module Replacement .
Push down on the fuel level sensor electrical connector tab (1), disengaging the retainer, and disconnect the electrical connector.

Fig 2: View Of Module Wiring Clip

Courtesy of GENERAL MOTORS COMPANY

Remove the fuel level sensor wiring from under the module clip (2).
Push in the fuel level sensor tabs (1) disengaging the sensor clips from the module bucket.

Fig 3: Identifying Fuel Module Bucket

Courtesy of GENERAL MOTORS COMPANY

Slide the fuel level sensor up out from the module bucket.