LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 438 (Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions) >> Repair Instructions >> Fuel Injector Replacement (LLT) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relieve the high side fuel system pressure. Refer to Fuel Pressure Relief Fuel Pressure Relief (High Side) .
    2. NOTE:

    The fuel injectors have an alignment feature, note the position of the injectors alignment for installation.

  2. Remove the fuel injection fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 1 (LLT) , or Fuel Injection Fuel Rail Assembly Replacement - Bank 2 (LLT) .
  3. For removal of the fuel injectors, refer to Fuel Rail and Injectors Cleaning and Inspection .
scientia non olet · About LEMON Manuals