LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 438 (Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions) >> Repair Instructions >> Fuel Injector Replacement (LLT) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prepare the fuel injectors for assembly, refer to Fuel Rail and Injectors Cleaning and Inspection .
    2. NOTE:

    The fuel injectors have an alignment feature and must be reinstalled as noted during removal.

  2. Install the fuel injection fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 1 (LLT) , or Fuel Injection Fuel Rail Assembly Replacement - Bank 2 (LLT) .
  3. Pressure up the fuel system and check for leaks.
scientia non olet · About LEMON Manuals