LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 434 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Ignition Lock Cylinder Opening Trim Cover Replacement

Ignition Lock Cylinder Opening Trim Cover Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition Lock Cylinder Opening Trim Cover
GM2876812Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the steering column lower trim cover bolts. Refer to Steering Column Lower Trim Cover Replacement .
1 Ignition Lock Cylinder Opening Trim Cover Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .

2 Ignition Lock Cylinder Opening Trim Cover

Procedure

  1. Unclip the ignition lock cylinder opening trim cover from steering column lower trim cover.
  2. Separate the ignition lock cylinder opening trim cover from the steering column upper trim cover.