LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Repairing Connector Terminals (Terminal Repair) >> Unsealed Terminals

Unsealed Terminals

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cut off the terminal between the core and the insulation crimp to minimize any wire loss.
  2. To minimize wire loss, remove only the insulation required.
  3. Position the stripped wire in the terminal.
  4. Hand Crimp the core wings first.
  5. Hand Crimp the insulation wings around the cable.
scientia non olet · About LEMON Manuals