LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P2534 or P2535: Ignition On/Start Switch >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

P2534 

The TCM detects 6 V or less on the ignition voltage circuit, with the ignition turned ON.

P2535 

The TCM detects greater than 6 V or greater on the ignition voltage circuit, with the ignition turned OFF.