LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (Automatic Transmission - 6T75 (M7V M7X) - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> No Fourth, Fifth, and Sixth Gear

No Fourth, Fifth, and Sixth Gear

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
4-5-6 Clutch Assembly
  • Inspect for damaged or broken 4-5-6 clutch piston (433) and piston seals (430-432).
  • Inspect for broken or disengaged 4-5-6 backing plate retainer (442).
  • Inspect for damaged or broken 4-5-6 clutch dam piston (435) and piston seals damaged, worn or delaminating.
  • Inspect for broken or disengaged 4-5-6 clutch dam retainer (436).
  • Inspect for sheared or stripped splines on the reaction carrier hub (438).
  • Inspect for sheared or stripped splines on 3-5-rev/4-5-6 housing to turbine shaft (422).
  • Inspect for loose, worn or damaged 3-5-rev/4-5-6 housing bushing.
  • Inspect for broken, porous or improper surface finish or plugged oil passages of the 3-5-rev/4-5-6 housing (422).
  • Inspect for failure of the input shaft thrust bearing (32).
  • Inspect for damaged, stripped or sheared splines on 4-5-6 clutch plates (439-441).
  • Inspect for broken or fatigued 4-5-6 clutch piston return spring (434).