LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (Automatic Transmission - 6T75 (M7V M7X) - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Harsh Fourth, Fifth, and Sixth Shift

Harsh Fourth, Fifth, and Sixth Shift

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
4-5-6 Clutch Assembly
  • Inspect for leaking 4-5-6 clutch piston (433) and piston seals (430-432).
  • Inspect for plugged or restricted 4-5-6 piston dam air bleed.
  • Inspect for fatigued 4-5-6 clutch piston spring (434).
  • Inspect for leaking 4-5-6 clutch dam seals (435).
  • Inspect for improper surface finish on 4-5-6 clutch plates (439-441).
  • Inspect for porous, improper surface finish, seal groove damage or plugged or restricted oil passages of the 3-5-rev/4-5-6 housing (422).
  • Inspect for leaking or damaged 4-5-6 piston dam (435).