LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (Automatic Transmission - 6T75 (M7V M7X) - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Harsh First and Reverse Shift

Harsh First and Reverse Shift

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
Case Cover Assembly (403) Inspect for plugged or improperly positioned low and reverse piston (408) air bleed.
Low and Reverse Clutch
  • Inspect for improper surface finish on low and reverse clutch plates (449-453).
  • Inspect for damaged or worn low and reverse clutch plates (452).
  • Inspect for damaged low and reverse clutch backing plate (453).
  • Inspect for worn splines on backing plate (453).
  • Inspect for damaged low and reverse clutch piston assembly (408), spring (409), and spring retaining ring (410).
  • Inspect for fatigued or binding low and reverse clutch piston return spring (409).
  • Inspect for broken low and reverse clutch wave plate (449).
Lower Valve Body Inspect for stuck 4-5-6 clutch boost valve.