Conditions for Running the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
Ignition voltage is between 8.6-32 V.
High side driver is enabled.
Output speed is 36 RPM or greater, or the accelerator pedal position is 0.5 % or greater.
Throttle position signal is valid.
Engine speed is 400-7, 500 RPM for 5 s.
Transmission fluid temperature is -6.7°C (20°F) or greater.