Conditions for Running the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

P182E

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0401, P042E, P0716, P0717, P0722, or P0723 is not set.
Engine speed is 400-7500 RPM for 5 s.
Ignition voltage is 8.6-32 V.
Engine torque signal is valid.

P1915

DTC P0722, P0723, or P1915 is not set.
Transmission output shaft speed is 90 RPM or less.
Ignition voltage was 5 V or greater, and has not dropped below 2 V.