Conditions for Running the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
Engine speed is 400-7, 500 RPM for 5 s.
High side driver is enabled.
Ignition voltage is greater than 8.5 V.
Throttle position signal is valid.
Transmission fluid temperature is -6.6°C (20°F) or greater.
Output shaft speed is 36 RPM or greater, or the throttle position is 0.5 percent or greater