Conditions for Running the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

P0711

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0658, P0668, P0669, P06AD, P06AE, P0712, P0713, P0716, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, or P2730 is not set.
Engine speed is 400-7, 500 RPM for 5 s.
Ignition voltage is greater than 8.5 V.
Brake torque is not active.
Engine torque signal is valid.
Throttle position signal is valid.

P0712 and P0713

DTC P0716, P0717, P0722, or P0723 is not set.
Engine speed is 400-7, 500 RPM for 5 s.
Ignition voltage is greater than 8.5 V.