LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Impala V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 103. Drive Belt Tensioner Installation

103. Drive Belt Tensioner Installation




Drive Belt Tensioner Installation




1. Install the drive belt tensioner.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the drive belt tensioner bolt and tighten to 50 Nm (37 lb ft).

scientia non olet · About LEMON Manuals