P0131 and P0137

WARNING: This page is about a different variant/trim than selected.

DTCs P0068, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
The system voltage is between 10-18 volts.
The scan tool special functions are not active
The Air Fuel Ratio parameter is between 0.9-1.1.
The TP Indicated Angle parameter is between 3-45 percent.
The Loop Status parameter is closed.
The ECT parameter is less than 131°C (267°F).
All fuel injectors are ON.
The traction control is not active.