LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 3.5L - Repair Instructions) >> Repair Instructions >> Secondary Air Injection Pump Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Air Pump Hose Quick Connect Fitting
    GM1844046Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Disconnect the secondary air injection (AIR) pump hose quick connect fitting (1) from the air cleaner assembly. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Disconnect the AIR pump hose quick connect fitting (1) from the AIR pump. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Remove the AIR pump hose from the vehicle.
scientia non olet · About LEMON Manuals