LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 3.5L - Repair Instructions) >> Repair Instructions >> Secondary Air Injection Pump Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Air Pump Hose Quick Connect Fitting
    GM1844046Courtesy of GENERAL MOTORS CORP.
  1. Position and connect the AIR pump hose quick connect fitting (1) to the AIR pump. Refer to Plastic Collar Quick Connect Fitting Service .
  2. Connect the AIR pump hose quick connect fitting (1) to the air cleaner assembly. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Close the hood.
scientia non olet · About LEMON Manuals