Piston Oil Nozzle Cleaning and Inspection
WARNING: This page is about a different variant/trim than selected.
- Clean the piston oil nozzle in cleaning solvent using GM P/N 10953463 (Canadian P/N 88901148) or equivalent.
- Dry the nozzle with compressed air.
- Inspect the piston oil nozzle for the following:
- For cracks or damage
- Plugged oil passages (1)
- Bent, misaligned, or cracked oil nozzle tubes (2)
- Bent or broken clip (3)
WARNING:
Refer to Cleaning Solvent Warning
.
WARNING:
Wear safety glasses in order to avoid eye damage.