LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L - Repair Instructions - On Vehicle) >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Crankshaft Front Oil Seal
    GM1557855Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the NEW oil seal with clean engine oil.
  2. Align the EN-48869  and the crankshaft front oil seal with the engine front cover and crankshaft. See Special Tools .
  3. Install the crankshaft front oil seal using EN-48869  and a suitable tool. See Special Tools .
  4. Install the crankshaft key into the keyway.
  5. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
scientia non olet · About LEMON Manuals