LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR L4-2.0L Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 2. Engine Oil Cooler Removal

2. Engine Oil Cooler Removal




Engine Oil Cooler Removal




1. Remove the oil cooler bolt.

Important: The oil cooler cannot be flushed or otherwise cleaned of contamination. Replace the oil cooler if a mechanical condition is suspected that could cause the oil cooler to be contaminated.


2. Remove the oil cooler.

scientia non olet · About LEMON Manuals