Steering Wheel Replacement

Fig 1: View Of Steering Wheel Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement .
1	Steering Wheel Horn Contact Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 8 N.m (71 lb in)
2	Steering Wheel Horn Contact Procedure: Disconnect any electrical connectors as needed.
3	Steering Wheel Nut Tighten: 40 N.m (30 lb ft)
4	Steering Wheel Procedure Use puller J 1859-A and puller legs J 42578 to remove the steering wheel. See Special Tools . Disconnect any electrical connectors as needed. Special Tools J 1859-A Steering Wheel Puller J 42578 Steering Wheel Puller Legs. See Special Tools .