Heater Inlet Hose Replacement (LNF)

Fig 1: Identifying Heater Inlet Hose

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill LE5, L61) or Cooling System Draining and Filling (Static Fill LNF) or Cooling System Draining and Filling (GE 47716 Fill) . Remove the evaporator hose assembly. Refer to Air Conditioning Evaporator Hose Assembly Replacement Remove the condenser tube. Refer to Condenser Tube Replacement (LNF)
1	Heater Inlet Hose Procedure: Using J 38185 to reposition the heater inlet hose clamps. Special Tools: J 38185 Hose Clamp Pliers

Callout

Component Name

Preliminary Procedure

Heater Inlet Hose
Procedure:
Using J 38185 to reposition the heater inlet hose clamps.
Special Tools:
J 38185 Hose Clamp Pliers