Conditions for Running the DTC: P0137

WARNING: This page is about a different variant/trim than selected.

DTCs P0036, P0037, P0038, P0116, P0117, P0118, P0119, P0128, P2232 are not set.
The engine is running.
The Ignition 1 Signal parameter is between 10-18 volts.
The modeled exhaust gas temp model is more than 700°C (1,292°F) for at least 90 seconds.
The modeled exhaust gas temp model is less than 800°C (1,472°F).
The time after engine start is less than 5.1 seconds.
The engine coolant is more than 60°C (140°F) after last engine shut-down.
The engine coolant at start is less than 40°C (104°F).
DTC P0137 runs once per drive cycle when the above conditions are met.