LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Manual Transmission - Mu3) >> Repair Instructions - Off Vehicle >> Clutch Housing Assemble >> Assemble

Clutch Housing Assemble: Assemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Differential Bearing Race
    GM895287Courtesy of GENERAL MOTORS CORP.
  1. Press in the new differential bearing race using the J 44809  . See Special Tools . Use the 87 92 236  as a base for the pressing operation. See Special Tools .
    2. Fig 2: Installing Axle
    GM895288Courtesy of GENERAL MOTORS CORP.
  2. Install the new axle using the J 44809  . See Special Tools .
    3. Fig 3: Installing Input Shaft Bearing Race
    GM1553681Courtesy of GENERAL MOTORS CORP.
  3. Press in the new input shaft bearing race using the 83 90 312  (1). See Special Tools . Use the 83 90 114  (2) and the 87 91 311  (3) as a base for the pressing operation. See Special Tools .
scientia non olet · About LEMON Manuals