LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Turbocharger Oil Feed Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Turbocharger Oil Feed Pipe Bolts And Pipe
    GM2003826Courtesy of GENERAL MOTORS CORP.
  1. Remove the catalytic converter. Refer to Catalytic Converter Replacement (LNF) .
  2. Remove the thermostat housing. Refer to Engine Coolant Thermostat Housing Replacement (LNF) .
  3. Remove the turbocharger oil feed pipe bolts (1) and pipe.
  4. Remove and discard the turbocharger oil feed pipe gaskets.
scientia non olet · About LEMON Manuals