LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Level Indicator Tube And Bracket
    GM2003955Courtesy of GENERAL MOTORS CORP.
  1. Remove the charge air cooler (CAC) outlet pipe. Refer to Charge Air Cooler Outlet Pipe Replacement .
  2. Remove two wire harness clips (1) from the oil level indicator tube bracket.
  3. Remove the vacuum hose (2) from the oil level indicator tube.
    4. Fig 2: Oil Level Indicator & Tube
    GM1717518Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil level indicator tube bolt.
  5. Remove the oil level indicator tube and indicator.
scientia non olet · About LEMON Manuals