LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Engine Oil Cooler Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Oil Cooler Hoses & Bolts
    GM2035289Courtesy of GENERAL MOTORS CORP.
  1. Install the oil cooler.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the oil cooler bolts (2) and tighten to 22 N.m (16 lb ft).
  3. Connect the oil cooler hoses (1).
  4. Fill the charged air cooling system. Refer to Cooling System Draining and Filling (Static Fill LNF) .
scientia non olet · About LEMON Manuals