LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Crankshaft Balancer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the right engine splash shield. Refer to Engine Splash Shield Replacement - Right Side .
  2. Remove the engine drive belt. Refer to Drive Belt Replacement .
    3. Fig 1: View Of Harmonic Balancer Holder J38122-A
    GM467429Courtesy of GENERAL MOTORS CORP.
  3. Use J 38122-A  to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt.
  4. Remove the crankshaft balancer bolt. Discard the bolt.
    5. Fig 2: View Of Crankshaft Balancer
    GM412138Courtesy of GENERAL MOTORS CORP.
  5. Remove the crankshaft balancer.
scientia non olet · About LEMON Manuals