LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L) >> Repair Instructions - Off Vehicle >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Level Indicator Tube
    GM1769542Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the knock sensor from the oil level indicator tube.
  2. Remove the electrical wiring harness from the oil level indicator tube.
  3. Remove the oil level indicator tube bracket to the intake manifold bolt.
  4. Remove the oil level indicator and the oil level indicator tube from the oil pan.
  5. Inspect the O-rings for damage. Replace if damaged.
scientia non olet · About LEMON Manuals