LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L) >> Repair Instructions - Off Vehicle >> Crankshaft Front Oil Seal Installation >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 34115  Sprocket Bearing Installer. See Special Tools .

    Fig 1: Installing Crankshaft Front Oil Seal
    GM414081Courtesy of GENERAL MOTORS CORP.
  1. Install the seal into the front cover using the J 34115  . See Special Tools .
  2. Ensure that the engine front cover is properly supported when installing the seal.
scientia non olet · About LEMON Manuals