Rear Toe Inspection
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
Use commercially available computerized four wheel alignment equipment to measure wheel alignment (caster, camber, toe, and turning angle). Follow the equipment manufacturer's instructions.
- Release the parking brake to avoid an incorrect measurement.
- Check the toe.
Rear toe-in: 2.5±2.5 mm (0.10±0.10 in)
NOTE: If the measurement is not within specifications, check for bent or damaged suspension components.