Clearing the HFL System
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This operation clears the HFL system of all passcode(s), any paired phones, and all names in the HFL phonebook.
- Clearing the HFL system is recommended before selling the vehicle.
- If the system is locked and the pass code is lost or forgotten, see the symptom troubleshooting (see THE HFL SYSTEM DOES NOT RECOGNIZE ALL VOICE PROMPTS ).
- Press and release the HFL TALK button. After the beep, say "System Setup Clear" and the HFL system responds, "This process will clear all paired phones, clear all entries in the phonebook, clear the security passcode and restore all defaults in the system setup. Is this what you would like to do?"
- Press and release the HFL TALK button. After the beep, say "Yes" and the HFL system responds, "Preparing to clear the system, which may take up to 2 minutes to complete. To proceed, press the talk button, and say continue. Otherwise say go back or cancel."
- Press and release the HFL TALK button. After the beep, say "Continue" to proceed, or say "Go back" or "Cancel".
- If you said "Continue," the HFL responds, "Please wait until the system is cleared." After a short period. of time (up to two minutes) the HFL responds, "The system has been cleared."