Front Passenger's Door
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front passenger's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
- Disconnect the 10P connector (A) from the actuator (B).
- Check for continuity between the terminals.
There should be continuity between terminals No. 8 and No. 10 when the door lock knob switch in the UNLOCK position and no continuity when the switch is in the LOCK position.
- If the continuity is not specified, replace the front passenger's door latch assembly (see FRONT DOOR LATCH REPLACEMENT ).