LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Conventional Brake Components) >> Conventional Brake Components >> Brake Pedal and Brake Pedal Position Switch/Idle Stop Switch Adjustment >> Pedal Free Play

Pedal Free Play

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the ignition switch in LOCK (0), inspect the play (A) at the brake pedal pad (B) by pushing the brake pedal by hand. If the brake pedal free play is out of specification, adjust the brake pedal position switch (C). If the brake pedal free play is insufficient, it may result in brake drag.

    Free play: 1.0-5.0 mm (0.04-0.20 in) 

    Fig 1: Inspecting Play At Brake Pedal Pad
    G06430687Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals