Rear Door Glass Outer Weatherstrip Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the door and related parts.

Lower the glass fully.
Remove the rear door rear sash trim (see REAR DOOR REAR SASH TRIM REPLACEMENT ).
Pull up the rear of the door glass outer weatherstrip (A) and detach the hooks (B). Slide the weatherstrip rearward, then remove it.

Fig 1: Locating Rear Door Glass Outer Weatherstrip
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the weatherstrip in the reverse order of removal, and note these items:
- Push the weatherstrip into place securely.
- Make sure that there is no clearance between the front edge of the weatherstrip and door sash outer trim.