LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Rear Suspension) >> Dynamic Damper Replacement

Dynamic Damper Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle on a lift (see LIFT AND SUPPORT POINTS ).
  2. Remove the dynamic damper (A) from the axle beam.
    NOTE: Use new self-locking nuts (B) during reassembly.
    Fig 1: Dynamic Damper and Nuts With Torque Specification
    G06430649Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the new dynamic damper in the reverse order of removal.
scientia non olet · About LEMON Manuals