LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Seats) >> Rear Seat Removal/Installation >> Seat cushion

Seat cushion

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt from the slit in the seat cushion (A).
    Fig 1: Seat Cushion And Bolt With Torque Specifications
    G06431140Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Pull the seat hook knobs (A) while pushing down on the seat cushion (B) to release the hooks (C).
    Fig 2: Pulling Seat Hook Knobs
    G06431141Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Pull up the seat cushion to release the seat belt buckles (D) from their slots (E), and remove it.
  4. Install the seat cushion in the reverse order of removal, and note these items:
    • Before attaching the seat cushion, make sure there are no twists or kinks in the seat belts.
    • When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion.
scientia non olet · About LEMON Manuals