Passenger's Dashboard Undercover Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Take care not to scratch the dashboard and its related parts.

Remove the passenger's dashboard undercover (A).
1. Gently pull down the rear edge to detach the clips (B, C).
2. Pull the cover away to release the pins (D) from the holders (E).
Fig 1: Identifying Passenger's Dashboard Undercover, Clip And Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the pins into place securely.