LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Dashboard) >> Driver's Dashboard Undercover Removal/Installation

Driver's Dashboard Undercover Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Take care not to scratch the dashboard and its related parts.
  1. Remove the driver's dashboard undercover (A).
    1. Turn the lock knob (B) 90 °.
    2. Gently pull down the rear edge to detach the clips (C, D).
    3. Pull the undercover away to release the pins (E) from the holders (F).
    Fig 1: Identifying Driver's Dashboard Undercover
    G06431064Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the undercover in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips and pins into place securely.
scientia non olet · About LEMON Manuals