Rear Air Outlet Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the body.

Remove the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION ).
Detach the hooks (A), then remove the rear air outlet (B).

Fig 1: Identifying Hooks And Rear Air Outlet
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the air outlet by pushing on the hook portions until the hooks snap into place.