DTC 31, 32, 33, 34, 35, 36, 37, 38: ABS Solenoid Valve Malfunction
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch to LOCK (0), then turn it to ON (II) again.
- Check for DTCs with the HDS.
Is DTC 31, 32, 33, 34, 35, 36, 37, or 38 indicated?
YES -Check for loose terminals in the ABS modulator-control unit 47P connector. If necessary, substitute a known-good ABS modulator-control unit (see ABS MODULATOR-CONTROL UNIT REMOVAL AND INSTALLATION ), and retest.
NO -Intermittent failure, the system is OK at this time.