Engine Wire Harness (Transmission section)
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE WIRE HARNESS SPECIFICATIONS
| Connector or Terminal | Ref | Cavities | Location | Connects to |
|---|---|---|---|---|
| CVT input (drive pulley) speed sensor | 4 | 3 | Transmission housing | |
| CVT output (driven pulley) speed sensor | 3 | 3 | Transmission housing | |
| CVT speed sensor | 1 | 3 | Transmission housing | |
| Rocker arm oil control solenoid A | 11 | 2 | Transmission housing | |
| Rocker arm oil control solenoid B | 12 | 2 | Transmission housing | |
| Rocker arm oil pressure sensor A | 10 | 3 | Transmission housing | |
| Rocker arm oil pressure sensor B | 13 | 3 | Transmission housing | |
| Transmission range switch | 2 | 8 | Side of transmission housing | |
| C106 | 5 | 8 | On transmission housing | Solenoid wire harness |