SRS Unit Inputs and Outputs at Connector B (39P)

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying SRS Unit Inputs And Outputs At Connector B (39P)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

CONNECTOR TERMINALS REFERENCE CHART

Terminal Number

Wire Color

Terminal Name

Description

GRY⁽¹⁾

ODS

Sends and receives communication signal with the ODS unit

ORN⁽¹⁾

LSA -

Ground for the driver's side airbag inflator

PUR⁽¹⁾

LSA +

Power source for the driver's side airbag inflator

LT GRN⁽¹⁾

RSA -

Ground for the front passenger's side airbag inflator

PNK⁽¹⁾

RSA +

Power source for the front passenger's side airbag inflator

RED⁽¹⁾

LC1 -

Ground for the left side curtain airbag inflator

WHT⁽¹⁾

LC1 +

Power source for the left side curtain airbag inflator

BRN⁽¹⁾

LRP -

Ground for the driver's seat belt tensioner

PNK⁽¹⁾

LRP +

Power source for the driver's seat belt tensioner

LT GRN⁽¹⁾

RRP -

Ground for the front passenger's seat belt tensioner

LT BLU⁽¹⁾

RRP +

Power source for the front passenger's seat belt tensioner

YEL⁽¹⁾

FLBC

Driver's seat belt buckle switch

GRN⁽¹⁾

FRBC

Front passenger's seat belt buckle switch

LT BLU⁽¹⁾

SS +

Driver's seat position sensor

BLU⁽¹⁾

RC1 -

Ground for the right side curtain airbag inflator

YEL⁽¹⁾

RC1 +

Power source for the right side curtain airbag inflator

GRY⁽¹⁾

LS1 -

Ground for the left side impact sensor (first), rear safing sensor, left side impact sensor (second)

PNK⁽¹⁾

LS1 +

Power source for the left side impact sensor (first), rear safing sensor, left side impact sensor (second)

LT GRN⁽¹⁾

RS1 -

Ground for the right side impact sensor (first), right side impact sensor (second)

BRN⁽¹⁾

RS1 +

Power source for the right side impact sensor (first), right side impact sensor (second)

⁽¹⁾	Wire colors may be substituted in this table.