Wiring Precautions

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Some of the SRS wiring can be identified by special yellow outer covering, and the SRS connectors can be identified by their yellow color. Observe the instructions.

Never attempt to modify, splice, or repair SRS wiring. If there is an open or damage in SRS wiring, replace the harness.

Fig 1: Precautions For Repair SRS Wiring
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Be sure to install the harness wires so they do not get pinched or interfere with other parts.

Fig 2: Precautions For Harness Wires Do Not Pinched
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Make sure all SRS ground locations are clean, and grounds are securely fastened for optimum metal-to-metal contact. Poor grounds can cause intermittent problems that are difficult to diagnose.