LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Exterior Lights) >> License Plate Light Replacement

License Plate Light Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push the license plate light (A) to the side to release the retaining spring, and pull out the license plate light.
    Fig 1: Identifying License Plate Light
    G06431590
  2. Disconnect the 2P connector (A) from the light.

    License Plate Light: 5 W 

    Fig 2: Identifying 2P Connector, Lens, Housing And Bulb
    G06431591
  3. Separate the lens (B) and the housing (C), then remove the bulb (D).
  4. Install the license plate light in the reverse order of removal.
scientia non olet · About LEMON Manuals