LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Exterior Lights) >> Bulb Replacement >> Headlight (High Beam)

Headlight (High Beam)

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the 2P connector (A) from the cover (B).
  2. Turn the cover 30° counterclockwise to remove it from the headlight assembly.
  3. Disconnect the 2P connector (C) from the bulb socket.

    Headlight (High Beam): 60 W 

    Fig 1: Identifying 2P Connector, 2P Connector And Cover
    G06431579
  4. Turn the bulb socket 45° counterclockwise to remove the bulb.
  5. Install a new bulb in the reverse order of removal. Make sure the notches in the bulb align with the tabs in the headlight.
NOTE: Do not touch the glass of the bulb with your hands. If necessary, clean the glass area with alcohol.
scientia non olet · About LEMON Manuals