LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (12 Volt Battery) >> 12 Volt Battery Terminal Disconnection and Reconnection >> Disconnection

12 Volt Battery Terminal Disconnection and Reconnection: Disconnection

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Some systems store data in memory that is lost when the battery is disconnected. Do the following procedures before disconnecting the battery.
  1. Make sure you have the anti-theft code(s) for the audio system and/or navigation system (if equipped).
  2. If you are replacing the audio unit or the audio-navigation unit (if equipped), write down the audio presets (AM and FM).
  3. Make sure the ignition switch is in LOCK (0).
  4. Disconnect and isolate the negative cable from the battery.
    NOTE: Always disconnect the negative battery cable from the battery first.
  5. Disconnect the positive cable from the battery.