LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (General Information) >> Lift and Support Points >> Floor Jack

Floor Jack

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. When lifting the front of the vehicle, apply the parking brake. When lifting the rear of the vehicle, put the shift lever in P.
  2. Block the wheels that are not being lifted.
  3. Position the floor jack under the front jacking bracket (A) or the rear jacking bracket (B). Center the jacking bracket on the jack lift platform (C), and jack up the vehicle high enough to fit the safety stands under it.
    Fig 1: Identifying Floor Jack Positions
    G06428710Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Position the safety stands under the support points, and adjust them so the vehicle is level.
  5. Lower the vehicle onto the stands.
scientia non olet · About LEMON Manuals