A/C Pressure Sensor
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
The A/C pressure sensor converts A/C pressure into electrical signals to the PCM.
SYSTEM OPERATION CHART
| A/C System Pressure(1) | Sensor Output Voltage (V out) | System Operation | HDS PGM-FI Data List | ||
|---|---|---|---|---|---|
| Abnormally low pressure: Below 196 kPa (2.0 kgf/cm2 , 28 psi) | Below 0.685 V | The PCM disengages the compressor clutch. The radiator and condenser fans operate based on engine coolant temperature. | FAN HIGH CONTROL: ON, OFF FAN LOW CONTROL: ON, OFF A/C PRESSURE SENSOR: V, kPa (kgf/cm2 ) |
||
Normal operating pressure:
|
0.686 V to 1.944 V | The PCM cycles the compressor clutch based on cooling demand. The radiator and condenser fans operate at low speed unless the engine coolant temperature exceeds 206 °F. | |||
High operating pressure:
|
1.945 V to 4.575 V | The PCM cycles the compressor clutch based on cooling demand. The radiator and condenser fans operate at high speed. | |||
| Abnormally high pressure: More than 3,138 kPa (32 kgf/cm2 , 455 psi) | Above 4.575 V | The PCM disengages the compressor clutch. The radiator and condenser fans operate based on engine coolant temperature. | |||
|
|||||
The response of the A/C pressure sensor is shown in the graph.